Download User`s Guide - Epson America, Inc.

GP-C830/GP-M830/GP-C831/GP-M831/GP-C832/GP-M832
Paper may be jammed.
User’s Guide
Turn off the printer and check for a paper jam. If there is a paper
jam, remove the jammed paper, and then turn on the printer. If the
problem persists, turn off the printer, wait several minutes, and
then turn it on again.
The beeper sounds five sets of five short beeps (twenty-five times) and all the lights except the ink lights flash.
Cause
What to do
A fatal error has occurred.
Turn off the printer and turn it on again. If the problem persists,
check for a paper jam. If there is no jam, contact your dealer or a
qualified service person.
Print quality declines.
Cause
What to do
The print head nozzles are clogged.
Run the Head Cleaning utility to clear any clogged ink nozzles. For
more information, see “Cleaning the Print Head” on page 103.
Ink cartridges not manufactured by Epson are
used.
Use genuine Epson ink cartridges.
Medicine bags may become dirty when printing in
an environment with high humidity if the surface
of the medicine bags is a polyvinyl resin.
Print in an environment with humidity of 65% or less.
The printout may become blurry depending on
the media type.
Adjust the print density for the media type to prevent the printout
from becoming blurry. For more information, see “Printer settings”
on page 30.
Misaligned vertical lines appear.
Cause
What to do
The gaps in the print head are misaligned.
Run the Print Head Alignment utility. For more information, see
“Aligning the Print Head” on page 105.
The printing speed is slow when connecting using the parallel port.
Cause
What to do
The parallel interface is not set for high-speed
communication.
Use BI Parallel Port Driver, which is installed with the printer driver,
to communicate at high speed. For more information, see “BI
Parallel Port Driver” on page 40.
Printed characters are not what you expected
The typestyles or characters you sent with your software did not print.
Cause
What to do
Troubleshooting
61