Download Installer manual

Miscellaneous
5
Part no. 1x230V, Stainless steel
Part no. 3x230V, Stainless steel
Part number, 3x400V, Enamel (for Germany, Switzerland and
Austria only)
Part no., 3x400V, Enamel
Part no. 3x400V, Stainless steel
Part no. 3x400V, Copper
1)Max. permitted impedance in the mains connected point in accordance with EN 61000-3-11. Start currents can cause short voltage
dips that could affect other equipment in unfavourable conditions.
If the impedance in the mains connection point is higher than that
stated it is possible that interference will occur. If the impedance in
the mains connection point is higher than that stated check with
the power supplier before purchasing the equipment.
2)With
feet dismantled the height is approx. 1930 mm.
6
8
10
12
665 361
665 363
665 365
665 342 665 343 665 344 665 345
665 331 665 332 665 333 665 334 665 335
665 302 665 303 665 304 665 305
665 321 665 322 665 323 665 324 665 325
665 281 665 282 665 283 665 284 665 285
Working range heat pump, compressor operation
The compressor provides a flow temperature up to 65 °C,
the remainder (up to 70 °C) is obtained using the additional
heat.
12 kW 3x400V, 8-12 kW 1x230V
7HPSHUDWXUH
p
°C
70
60
50
40
30
20
10
0
-15
-10
-5
0
5
10
15
20
25
30
35 °C
,QFRPLQJ EULQH WHPS
)ORZ SLSH
5HWXUQ SLSH
Other
7HPSHUDWXUH
p
°C
70
60
50
40
30
20
10
0
-15
-10
-5
0
5
10
15
20
25
30
35 °C
,QFRPLQJ EULQH WHPS
)ORZ SLSH
5HWXUQ SLSH
NIBE™ F1245
Chapter 12 | Technical data
79