Download Mobotix M15D-SEC - Network Webcams
Transcript
104/144 M15 Camera Manual: Operating The Camera Reconfiguring Network Addresses Of Cameras *Bonjour: automatic recognition of network services in IP networks Using Bonjour*, MxEasy not only finds cameras on the same network as your computer, it also finds MOBOTIX cameras located in other subnets (status Invalid network). In such a case, you would not be able to establish any connection to cameras in a different network or subnet (without going into much further detail regarding TCP/IP network configurations). This is possible, for example, when a camera with a factory IP address is connected to a network in which a DHCP server automatically assigns the IP addresses. MxEasy can automatically configure such a camera so that it is “integrated” into your existing network. To do so, you only have to select the affected camera in the list and then click Continue. After a security prompt, a new dialog box for configuring the selected camera is displayed. If your computer automatically obtains its IP address from a DHCP server, then this is certainly the best choice for that specific camera and most likely for all other cameras that have been found in a different subnet (Get IP address automatically option). If you have assigned a static IP address to your computer, you will probably want to assign static IP addresses (issued by your system administrator) to every camera (the Use this IP address option). Normally, you enter the same configuration used for the network settings of your computer. When you click OK, the selected cameras are automatically reconfigured and they are located in the same subnet as the computer. Integrating And Displaying Cameras After a camera has been reconfigured, it has the status Accessible and can be integrated into MxEasy. The MxEasy Assistant then displays the Define integration mode in MxEasy dialog box. © MOBOTIX AG • Security-Vision-Systems • Made in Germany www.mobotix.com • [email protected]