Download PDF - LPKF Laser & Electronics AG

Transcript
Circuit Board Plotters
Accessories for the LPKF ProMask and LPKF ProLegend
Laser Circuit Structuring
UV exposer
230/240 V:Part no. 117050
110/120 V: Part no. 117192
Transfers the transparency master onto the PCB in about 30 seconds.
LPKF ProMask consumables set (Part no. 117108)
Includes ProMask solder resist, developer, conditioner, laser printer film.
Through-Hole Plating
LPKF ProLegend consumables set (Part no. 117564)
Includes ProLegend labeling paint, developer, conditioner,
laser printer film.
Multilayer
Convection oven (Part no. 115877)
See page 66.
Accessories for LPKF ProtoPrint S/ProtoPrint S RP
229 mm x 279 mm (9” x 11”)
Max. compressed air
7 bar (102 psi)
Compressed air supply
1.7 – 6 bar (24.7 – 87 psi), 0.3 – 0.79 l/s
LDS Prototyping
Max. material size
SMT/Finishing
Vacuum table (Part no. 119684)
The vacuum table secures any PCB type from rigid to flexible, regardless
of their thickness. It can be transferred between systems without
breaking the vacuum. An optional ceramic slab (Part no. 125021) allows
the vacuum table to also be used for the subsequent reflow process.
Technical specifications subject to change.
TechInfo
Magnetic edge support
Magnetic edge support (4 pieces) Part no. 126507
Magnetic support pin (4 pieces) Part no. 128946
Positioning pin (4 pieces) Part no. 128947
Mechanical stretching frame
ZelFlex QR 362x480, double-sided
(included with ProtoPrint S).
Index
ZelFlex QR 266x380, double-sided
(included with ProtoPrint S RP).
Accessories for SMT Prototyping
67