Download Delphin 5 Help
Transcript
CHAMPS Modeling 48 Keyword Explanation Limits (recommended) SI-Uni t TEMPER Temperature -20 ... 60 °C RELHUM Relative humidity 0 ... 100 % VAPPRESS Water vapor pressure 0 ... Pa NORRAIN Rain flux density normal to the wall surface 0 ... l/m2s HORRAIN Rain flux density on a horizontal plane 0 ... l/m2s WINDDIR Wind direction, North=0 Deg, East=90 Deg, ... 0 ... 360 Deg WINDVEL Wind velocity 0 ... m/s SHWRAD Short wave radiation (balance) 0 ... W/m2 DIRRAD Direct sun radiation (short wave component) 0 ... W/m2 DIFRAD Diffuse sun radiation (short wave component) 0 ... W/m2 LOWRAD Long wave radiation (balance) LWEMIS Heat emission from surrounding ground (long wave component) ... 0 W/m2 SKYRAD Atmospheric counter radiation (long wave component) 0 ... W/m2 CLOUDCOV Cloud covering (alternative to long wave radiation) 0 ... 1 - PREHEAD Pressure head m WATFLUX Imposed moisture flux kg/m2 s HEATFLUX Imposed heat flux W/m2 SALTCONT Salt solution (concentration as molality) GASPRESS Gas (air) pressure VOCDENSG Intrinsic VOC density in gas phase W/m2 0 ... mol/kg Pa 0 ... kg/m3 Table 2: Climate conditions of Delphin 5 The Keyword is used to identify the respective data record in the Delphin 5 project file. The Limits are recommended values. There is no automatic check by the program. Possible physical units are the SI-Unit or any convertible unit. 4.2.2 Boundary conditions The boundary conditions describe model selections, parameters, time limits and assigned climate conditions. The user can define boundary condition data records using the Boundary Condition Edit Dialog. Table 3 shows the predefined boundary conditions, explanations, and related fluxes according to the balance equations. © 2005-2006 Andreas Nicolai and John Grunewald