Download Model #3802

Model #3802
Semiconductor
Sensor:
Home Screen
Status Panel – The Status Panel is located in the lower left corner of the
Home Screen. This panel displays the current New Focus sensor connected
to the Sensor Interface Module. The Status Panel also confirms communication between the Pocket PC and the Sensor Interface Module.
Properties Panel
Offset – Tap the OFFSET button to use the current power reading as an
offset value (zero reference) to eliminate a constant background reading.
Utilize the light shield provided with the Semiconductor Sensor to reduce
background light for low power readings. When the offset box is first
tapped, the screen displays zero and the offset value is shown in the Settings
Panel. The second time the box is tapped, the offset value is returned to zero
regardless of the power input at the time the box is tapped and the screen
reflects a 0 offset.
Tune Bar – Tap on the Tune Bar button to display a digital tune bar on the
Home Screen. When the tune bar is active a Reset button will also appear in
the Properties Panel. The Tune bar will display current relative scale indicators at each end. When the Tune Bar is active, each new maximum value is
displayed as the Peak value above the Tune Bar. A vertical indicator remains
at the current peak location on the Tune Bar. The Reset button will reset the
Peak value and the corresponding Peak indicator bar. Each new peak value
collected will generate an audio beep, move the indicator bar and display a
new peak value.
➠
NOTE: To remove the Tune Bar from the Home Screen, tap the
Tune Bar button a second time.
51