Download SIMATIC MV340 User`s Manual - Service, Support

Using ESP
Image Quality
The video view in EZ Mode (and also on the Video tab in I/O Parameters) allows you to
capture images from the SIMATIC MV340 for further analysis. If Upload Images is checked
and you click the Start button, image captures will be uploaded automatically for every good
read. Images will also be uploaded for every no read, upon release of the imager’s trigger.
You can right-click on a captured image to bring up the menu shown below. If you select
Store higher quality images, you will see a dropdown menu with JPEG 60% quality (small
size), JPEG 80% quality (full size), JPEG 100% quality (full size) and TIFF (full size).
The imager’s illumination setup can be restored by clicking the Default box in the EZ
Mode view. Refer to the Basic Operations section for more information about the
SIMATIC MV340’s illumination capabilities.
Note: If you have difficulty viewing TIFF images with Windows Picture and Fax Viewer, it
is recommended that you use Paint or viewer software that is optimized for TIFF files.
Note: TIFF images are large files and take significantly longer to download than JPEG images.
Right-click on the
image capture to
bring up this menu.
Note: Image size will vary depending on user settings for Region of Interest, and
whether or not Low Resolution Image is checked in the Illumination dialog in ESP.
Image Save Mode
Small Size (Displayed)
Small Size
Small Size
Small Size
Full Size
Full Size
Full Size
Full Size
Region of Interest
1280 x 1024
1280 x 1024
800 x 600
800 x 600
1280 x 1024
1280 x 1024
800 x 600
800 x 600
SIMATIC MV340 User’s Manual
Low Resolution
No
Yes
No
Yes
No
Yes
No
Yes
Final Image Size
320 x 256
320 x 256
400 x 296
400 x 296
1280 x 1024
640 x 512
800 x 600
400 x 296 (JPEG); 400 x 300 (TIFF)
2-3