Download OiDViEW User Manual
Transcript
OIDVIEW 6.0 | 115 Choose the desired interval (1 second is the default), and click on something else on the screen (or TAB away from the combo box), so it loses focus. The SNMP Poller will then calibrate itself. This could take a second to a minute depending on the polling interval chosen and the number of variables currently in the poll list. If the StatusBar is visible, you will see that the poller is calibrating. After the SNMP Poller has been calibrated, it will begin polling: The Poller status light will blink with a green color every time it is in the middle of a poll.