Download MBX IP Web Administration Guide 1.0

Station Directory Number Attribules (PGM 131-135
2-40
Chapter 2: Web Administration
ATTRIBUTE
DESCRIPTION
RANGE
DEFAULT
Auto Privacy
Enables auto privacy feature (to restrict the
intrusion/call-wait/camp-on/OHVA at a busy
station).
0: Off
1: On
Off
DID/DISA Restriction
If set, incoming DID and DISA calls to DN are
restricted.
0: Off
1: On
Off
CLIP Display
CLIP (Calling Line Identification
Presentation), an ISDN service, sends the
number of the calling party to the system in
the call SETUP message. If enabled, the
number will be shown in the Digital phone
LCD.
0: Off
1: On
On
COLP Display
COLP (Connected Line Id Presentation), an
ISDN service, sends the number of the
answering party to the system in the call
CONNECT message. If enabled, the number
will be shown in the Digital Phone LCD.
0: Off
1: On
Off
CLI/Redirect
When an incoming ISDN call is redirected, the
call SETUP message will contain an original
and redirected CLI. This selection
determines if the Digital Phone will display the
original or redirected CLI number.
0: CLI
1: Redirect
CLI
CLIR When Outgoing CLIR (Calling Line Identification Restriction),
an ISDN service, removes calling party ID
sent from the PSTN to the called party with a
RESTRICT instruction in the SETUP
message. If enabled, the system will send
RESTRICT instruction to the PSTN when an
outgoing ISDN call is placed.
0: Off
1: On
Off
COLR When
Incoming Answer
COLR (Connected Line Id Restriction), an
ISDN service, removes connected party ID
sent from the PSTN to the calling party with a
RESTRICT instruction in the CONNECT
message. If enabled, the system will send the
restrict instruction to the PSTN when the
station answers an ISDN call.
0: Off
1: On
Off
CLI Number
When not restricted (btn 4 & 5 above), entry is
added to the number sent in the ISDN call
SETUP or CONNECT message in place of
the station number.
24 digits
Release 1.0
MBX IP Web Administration Guide
November 2010