Download User`s Manual

Transcript
(9) START/STOP (USB Drive Mode)
Press this key to start or stop capture.
• During Free Running, starts capture.
• During capture, stops capture.
• Press this key while turning the power ON to access USB DRIVE Mode.
In USB Drive Mode, the internal memory is recognized by the PC as external storage
media.
USB Drive Mode Operation Procedure
1
Use a USB cable to connect the ZR-RX40 and a PC.
(When the USB driver has not been installed, install it as described in the Software Manual "Installing
the USB Driver".)
2
Connect the USB device to the ZR-RX40.
3
While pressing the ZR-RX40 [START/STOP] key, turn the power ON.
4
The external storage media is recognized by the PC and data exchange becomes possible.
If the USB device is not connected, the internal memory is recognized as
the external storage media.
48
Key Operation
ZR-RX40 User’s Manual