1
Download User`s Manual
Transcript
10. LIST OF PARAMETERS Parameter Display MODEL TAG NO SELF CHK A DISPLAY1 A01 INPUT1 A07 OUTPUT1 A08 OUTPUT2 A54 STATUS A56 REV NO A58 MENU REV A60 SELF CHK B DISPLAY2 B01 INPUT1 B07 OUTPUT1 B08 OUTPUT2 B60 SELF CHK D SET (I/O) D01 TAG NO.1 D02 TAG NO.2 D03 COMMENT1 D04 COMMENT2 D14 LINEARIZE D15 LOW CUT D38 OUT1 L_RNG D39 OUT1 H_RNG D40 OUT2 L_RNG D41 OUT2 H_RNG D49 OUT1 DR D50 OUT2 DR D60 SELF CHK P ADJUST P08 IN1 ZERO ADJ P09 IN1 SPAN ADJ P26 OUT1ZERO ADJ P27 OUT1SPAN ADJ P28 OUT2ZERO ADJ P29 OUT2SPAN ADJ P60 SELF CHK Q TEST Q03 OUT1 TEST Q04 OUT2 TEST Q60 SELF CHK *1 *2 *3 *4 Item Model Tag number Self-check result Display1 Input-1 Output-1 Output-2 Status *1 REV No. MENU REV Self-check result Display2 Input-1 Output-1 Output-2 Self-check result Setting (I/O) *4 Tag number-1 Tag number-2 Comment-1 Comment-2 Linearize Low input cut point *2 Output-1 low range *3 Output-1 high range *3 Output-2 low range *3 Output-2 high range *3 Direction of output-1 action Direction of output-2 action Self-check result Adjustment *4 Zero adjustment of input-1 Span adjustment of input-1 Zero adjustment of output-1 Span adjustment of output-1 Zero adjustment of output-2 Span adjustment of output-2 Self-check result Test *4 Forced output-1 Forced output-1 Self-check result The displayed status is to let the service staff know the past records of the product. The parameter becomes effective when SQR is selected in [D14:LINEARIZE] The parameters are the items to be set at the factory. Execute the following operations when indicating D** , P** , or Q** through JHT200 Handy Terminal. Press <F1>key, [ ] key, and <ENTER> key, in this order. Enter D, P, or Q in [ ]. 4 IM 77J03A01-02E 2nd Edition May 21, 2004-00
