Download User Manual

Cleaning
Notes on cleaning
NOTICE Danger of equipment damage!
Residues of cleansers and disinfectants produce corrosion.
Corrosion can destroy the machine.
¾ After every cleaning, including cleaning of the surroundings
(floor, adjacent machines, etc.), thoroughly rinse with water of
drinking water quality or clean by hand.
• Kind of anti-corrosion agent, refer to "Care products table".
• Only use H1 or FDA-approved lubricants and anti-corrosion agents.
• Checking the microbiological stability of the anti-corrosion agent
and lubricants regularly helps reduce the risk of product contamination.
6.1.8
Cleaning devices
Health hazard!
The cleaning devices will spread germs if they are not cleaned often
WARNING enough.
This can cause cross contamination, which will damage the product.
¾ Use only brushes and brooms that have plastic bristles.
¾ Clean the cleaning equipment daily and apply disinfectant afterwards.
6.2
Cleaning the machine
Info
• The recommended daily cleaning tasks recommended here must
be supplemented by the intensive cleaning procedure according
to the degree of dirt.
• Cleaning personnel must be instructed for the cleaning work by
the operating company.
• The sequence of the described tasks is to be exactly followed.
• For all cleaning work, follow the safety instructions.
Injury hazard!
Wet and greasy floors are slippery.
WARNING Slipping on wet or greasy floors can lead to serious injuries.
¾ Wear personal protective equipment.
23.03.2010
49