Download car seat travel tote
Transcript
65001 car seat travel tote Keep these instructions for future reference as they contain important information. Adult assembly required. Accessories not included. User Manual Instructions Loading Car Seat Travel Tote Fig. A Backpack Luggage Mode Fig. C 1. Unzip Car Seat Travel Tote. 1. Remove both shoulder straps from side 2. Place child safety seat in most compact, upright position before placing inside the Car Seat Travel Tote. 2. Install the straps by attaching both strap end clips to D-rings located at top of Car Seat Travel Tote. Fig. C 3. Load empty child safety seat into Car Seat Travel Tote as shown so that back of child safety seat faces zipper. Fig. A 3. Attach two remaining clips at other end of straps to the single D-ring located at bottom of Car Seat Travel Tote. 4. Zip to close. 4. Place arms through straps and lift Car Seat Travel Tote onto back. Fig. D Wheeled Luggage Mode Fig. B 1. If converting from backpack luggage mode, remove shoulder straps and store in side pocket. 2. Pull in direction shown. Fig. B pocket.* Note: Before checking luggage, close zipper to prevent accidental opening during transport and remove backpack straps and place in pocket. Make sure pocket is secure. Fig. D *Car Seat Travel Tote is pre-assembled in backpack luggage mode. This step is only necessary if you have removed the shoulder straps for transport. Note: The Car Seat Travel Tote is designed to hold a child safety seat only. Do not place any items, other than a child safety seat into Care Seat Travel Tote. To prevent injury, do not allow child to sit on this product while child car seat is enclosed and pulled in luggage mode. 1 Care: Wipe all parts with a clean cloth dampened with a mild soap and water solution. Air dry. Do not use bleach. Do not submerge in water. 2 making together better™ Questions? 1.866.869.8257 bricababy.com ©2010 BRICA, Inc. 500 West 5th Street, Suite 220, Charlotte, NC 28202 Retain this address for future reference. Printed in China