Download H330 Module AT Command User Manual - Premier

Command
Syntax
Response/Action
Remarks
Set
+CLCK=<fac>,
<mode>[,<pas
swd>[,<classx
>]]
For <fac> where <class> is
irrelevant(SC, FD):
The Set command
performs the specified
<mode> action on the
specified <fac>.
+CLCK=<fac>,2
+CLCK: <status>
For <fac> with several supported
<class>es:
+CLCK=<fac>,2
+CLCK: <status>,<class1>
[<CR><LF>
+CLCK: <status>,<class2>
[…]]
OK
Read
+CLCK?
ERROR
Test
+CLCK=?
+CLCK: (list of supported <fac>s)
The Test command
returns the list of
supported facilities.
The following table shows the +CLCK parameters.
<Parameter>
Description
<fac>
Please see <fac> Table in +CPWD command.
<passwd>
String type, 4-8 character password. Shall be the same as password
specified for the facility with command Change Password +CPWD
<mode>
0
Unlock
1
Lock
2
Query status (<passwd> does not apply)
Note: Query mode return only the active <fac>. In case no <fac> is
active the query will return the default (7).
<class>
Sum of integers, each representing a class of information.
Please see class table in +CCWA command.
The default value is 7.
<status>
0
Inactive
1
Active
Example:
AT+CLCK=?
H330 Module AT Command User Manual
Page 150 of 304