Download 2 - Siemens

Index
P
Performance range, C7, 1-3
Period duration counter, universal inputs, 7-2,
7-3
PG/PC, via spur line to MPI network, 4-5
Pin assignments, 2-10
Plug and socket connectors, view, 2-10
Printer, 1-4
Printer cable, 2-3
Printer connection, 2-10
PROFIBUS address, 3-3
Recommendation, 3-7
PROFIBUS bus cable, 2-15, 3-15
Assembling, 3-19
Characteristics, 3-15
Rules for cable laying, 3-16
To bus connector, 3-22
PROFIBUS bus connector, 3-18
PROFIBUS bus terminal, 2-15
PROFIBUS DP, 3-1, 3-2
Starting up, 3-25
PROFIBUS-DP network
Segment, 3-12
Setup example, 3-10, 3-11
Programming device, 1-5
Connection to an MPI network, 4-2, 4-3
In MPI network, 4-4
Programming device cable, 1-4, 2-15
R
Ready message, 2-25
Remote segment, 3-12, 3-14
Repeater, 3-3
RS 485 repeater, 1-5, 3-3, 3-15
Terminating resistance, 3-8
Using, 3-7
RUN, 2-28
Run-time meter, 2-23
SF, 2-28
Shield, 2-16
Shielding clips, 2-18
Signal modules, 1-3
SINEC L2-DP, 3-1
Spur lines, 3-5, 3-13
Length, 3-13
Starting up
CPU as DP master, 3-25
PROFIBUS DP, 3-25
Startup, 2-25, 3-25
Status bits, 5-7
DI/DO, 5-7
STOP, 2-28
Storage, of back-up batteries, 8-4
Surge impedance. Siehe Abschlußwiderstand
T
Technical specifications, dimensions, A-2
Terminating resistance, 3-6, 3-7
Example, 3-8
On bus connector, 3-7
On RS 485 repeater, 3-8
Set at the bus connector, 3-24
Transducer
Isolated, 6-3
Non-isolated, 6-3
Transmission rate
DP, 3-2
MPI, 3-2
U
Universal inputs
Assigning parameters, 7-3
Pin assignments, 7-3
V
S
S7-300 (CPU), 1-4
S7-400 (CPU), 1-4
Segment
MPI network, 3-12
PROFIBUS-DP network, 3-12
Self-test, 2-25, 3-1
Service programming device, 3-7
Setpoint configuration, 3-25
Setup guidelines, 2-16
C7-626 / C7-626 DP Control Systems
C79000-G7076-C626-01
V24, 2-13
Voltage measurement, 6-9
Voltage transducer, 6-2
Connection, 6-5
W
Wire break check, analog input module SM 331;
AI 8, 6-9
Index-3