Download 8. Client Software User Manual

Contents
1. Product Introduction……………………………………………………………………………………….…..4
1.1 Product Summary…………………………………………………………………….………………...………4
1.2 Main Functions of the Product………………………………………………………………………………....5
1.3 Main Functions of the Product………………………………………………………………………………....5
1.4 Diagram Specification…………………………………………………………………………………….…....6
2 MDVR Installation……………………………………………………………………………………...……....7
2.1 Set the main unit and the shockproof mount apart…………………………………………………………......7
2.2 Install the shockproof mount…………………………………………………………………………………...7
2.3 Install the DVR into the shockproof mount again, and fixed the screws……………………………………....8
3. Hard disk installation…………………………………………………………….…………………………....9
3.1 Remove the HDD case from the DVR………………………………………………………………………....9
3.2 Take the SATA connector out from the HDD Case……………………………………………………….…....9
3.3 Connect the SATA board with the SATA hard disk………………………………………….………………....9
3.4 Put the SATA hard disk into the shockproof case……………………………………………………………....9
3.5 Fasten the hard disk tightly by another 4 screws. ……………………………………………...………...…...10
4. Cables function and accessories instruction………………………………………………………………....11
4.1 Power supply cables. ………………………………………………………………………………………....11
4.2 Video/Audio input cables……………………………………………………………………………………...11
4.3 Signal cables / IO Alarm cables……………………………………………………………………….……....11
4.4 Video/Audio output cables…………………………………………………………………………………....12
4.5 HDD Reader……………………………………………………………………………………………..…....12
4.6 GPS antenna……………………………………………………………………………………………..…....13
4.7 3G antenna………………………………………………………………………………………………...…..13
5. Structure Introduction of the Product Appearance………………………………………………………....14
5.1 Front Panel………………………………………………………………………………………………….....14
5.2 Rear panel………………………………………………………………………………………………..…....15
5.3 Remote Control…………………………………………………………………………………..…………....16
6. Installation Instructions……………………………………………………………………………………....17
6.1. Humidity requirements…………………………………………………………………………………….... 17
6.2 Installed position………………………………………………………………………..………………….... 17
6.3 Equipment safety…………………………………………………………………………………………….. 17
6.4 Power connection………………………………………………………………………..…………………... 17
7 System Operating Instructions……………………………………………………………..………………....18
7.1 Start System…………………………………………………………………………………………...……....18
7.2 Shutdown System…………………………………………………………………………………...………...18
7.3 Basic Operation Instruction of Menu………………………………………………………………………....18