Download TS300-E8-PS4 User Guide

2.8
Cable connections
2.8.1
•
The bundled system cables are pre-connected before shipment. You do
not need to disconnect these cables unless you will remove pre‑installed
components to install additional devices.
•
Refer to Chapter 4 for detailed information on the connectors.
Motherboard connections
2
1
3
6
10
5
4
7
8
9
Standard cables connected to the motherboard
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
24-pin EATX power connector (from power supply to motherboard)
8-pin 12V power connector (from power supply to motherboard)
System fan connector (from system fan to motherboard)
USB 3.0 connector (from motherboard to front I/O board)
USB 2.0 connector (from motherboard to front I/O board)
SATA conectors (system default; from motherboard to SATA/SAS backplane)
Chassis Intrusion connector (from rear chassis intrusion switch to motherboard)
System panel connector (from motherboard to front I/O board)
SAS connectors (for ASUS PIKE only; from motherboard to SATA/SAS backplane)
Serial General Purpose Input/Output connectors
ASUS TS300-E8-PS4
2-25