Download Neutron Engineering Inc.

Transcript
Neutron Engineering Inc.
2. SUMMARY OF TEST RESULTS
Test procedures according to the technical standards:
EMC Emission
EN 55103-1:1996
Test Description
Test Method
Limit
Judgment
Conducted Emission
EN 55022, 30-1000MHz
Class B
PASS
Radiated Emission
EN 55022, 0.15-30MHz
Class B
PASS
------
PASS
------
N/A
------
PASS
Class A
PASS
------
PASS
------
N/A
NOTE (4)
------
N/A
NOTE (5)
------
PASS
Signal, control and dc power CISPR G recommendation,
port emissions
0.15-30MHz
50Hz-50KHz test at 10cm
Magnetic Emissions
test method outlined in
(Rock mount)
Annex A of standard
50Hz-50KHz test at 1m test
Magnetic Emissions
method outlined in Annex A
(Non-Rock mount)
of standard
Harmonic Current Emission
EN 61000-3-2:2006
Voltage Fluctuations &
Flicker
EN 61000-3-3:1995
+A1: 2001+A2:2005
EN 55014 – required if
device produces click
interference
Required on all AC power
ports
Clicks on AC
(Discontinuous interference)
In-Rush Current AC power
Antenna port conducted
emission
NOTE:
(1)
(2)
(3)
(4)
(5)
EN 55013,30-1000MHz
Remark
NOTE (2)
NOTE (3)
” N/A” denotes test is not applicable in this Test Report.
In accordance with manual instructions, the product need not be rock mount.
The power consumption of EUT is less than 75W and no Limits apply.
No clicks.
No limit, But manufacturer must state the peak inrush current in the user-documentation.
Report No.: NEI-EMC-1-1001C020
Page 7 of 80