Download USERS MANUAL
Transcript
Lift off the shroud from the base frame slightly (See Fig 9). The shroud is attached by a clip and velcro and lifts off easily. Disconnect the rear indicator and tail light cable connectors to totally separate the shroud from the base frame to avoid scratching when assembling the batteries (See Fig 10). Connect each battery harness ring terminal to the batteries terminal posts. Observing battery positive and negative polarity color coding. Red is positive, black is negative. (See Fig 11) Velcro Shroud (Fig 9) Disconnect (Fig 10) Note: There is a battery circuit diagram labeled on the backside of the shroud. Please refer this diagram before you assemble the battery. ﹢/﹣pole Connected (Fig 11) 9