Download T7400A - LRS Colombia

Transcript
Interval
The Interval defines how many seconds of time passes between pages.
The default Interval is 10 seconds.
The Interval can be set from 10-255 seconds.
To set the Interval
1. Press SETUP and enter Password.
2. Press 1) system.
3. Press F2 (DOWN) until display shows 17) Tracking.
4. Press 3.
5. Select 3) Interval.
6. Type in a new time, in seconds, and press ENTER.
DURATION
0-3600 Seconds
INTERVAL
10-255 Seconds
PAGE TIME
OFF TIME
PAGE TIME
•••
PAGE TIME
OFF TIME
Group Paging
General Purpose
This function is used with Alpha pagers. These pagers can be programmed to respond to group calls. Ten
groups are available and each pager can be a member of 5 groups. Each pager will respond to its individual number and to any groups it belongs to. See example below.
GROUP 1
Pager
99
GROUP 2
Pager
51
Pager
77
Pager
94
Group Paging Rules
General rules for paging groups are:
• Pagers must be programmed in the group mode.
• Staff pagers must be numbered above 100. (1-99 are reserved for groups)
• Any alphanumeric pager can be a member of up to 5 groups.
Long Range Systems
10
T7400A User Manual