Download Software Reference Manual mGuard Firmware 8.1

Network menu
Network >> Mobile Network >> SIM Settings
Current SIM
Slot
Indicates whether SIM 1 or SIM 2 is used.
State
Indicates the state of the SIM card:
– SIM state unknown
– SIM inserted and authorized
– Invalid SIM
– SIM inserted
No SIM found
Roaming
If roaming is enabled, a mobile network device can also dial
into another network.
Here, the mobile network that the mGuard has dialed into is
displayed.
– Not registered: the mGuard has not dialed into any mobile network
– Registered to home network: the mGuard has dialed
into the mobile network provided
– Registered to foreign network: the MGUARD has registered with a foreign mobile network
Primary SIM slot
Current Provider
Name of the mobile network provider in use
Activation
You can prevent or enable the use of the SIM card.
State
–
–
–
–
–
–
–
PIN of the SIM card
The SIM card can be protected with a PIN. The PIN is saved in
the mGuard. The PIN is not displayed in the web browser.
However, it is possible to overwrite or delete it.
SIM tray inserted (without SIM card)
No SIM tray (neither the SIM card nor tray are available)
Wrong PIN
PIN required
PUK required (if the pin is incorrectly entered too often)
SIM error (the SIM card could not be accessed)
SIM ready
A PIN is used in the following cases:
– When the mGuard is restarted
– When the SIM card is replaced
– When the PIN is changed
– When the SIM card is activated
– For login to a mobile network provider
Roaming
Roaming enables or prevents dialing into foreign mobile networks. Dialing into another network can incur additional costs.
When roaming is disabled, you can select a fixed provider.
Provider selection
You can restrict the SIM card registration to a provider from
the list.
This selection is only active when roaming is disabled.
105661_en_02
Innominate Security Technologies
175