Download FALCOM A1 User Manual / Command List

Funkanlagen Leipoldt OHG FALCOM A1 User Manual / Command List V2.77
Application to GSM
GSM to application
ATDL
0146290800
OK
3.7. Signal Quality
redial last number
last call was a speech call
command valid
+CSQ
This command shall be used by the application to know the reived signal
strength indication <rssi> and channel bit error rate <ber>.
<rssi>:
0-113
1-111
2...30
31 -51
99
dBm or less
dBm
-109... – 53 dBm
dBm or greater
not know or not detectable
<ber> (in percent):
0...7 as RXQUAL values in the table in GSM 05.08 [20] subclause 8.2.4
99 not known or not detectable
Application to GSM
GSM to application
AT+CSQ
+CSQ: <rssi>,<ber>
OK
3.8. Network registration
<rssi> and <ber> as defined in the GSM TS
07 07
+CREG
This command is used by the application to know the registration status
of the mobile.
<mode>
0: Disable network registration unsolicited result code
1: Enable network registration code result code +CREG: <stat>
<stat>
0: not registered, ME is not currently searching a new operator
1: registered, home network
2: not registered, ME currently searching a new operator to register to
3: registration denied
This confidential document is the property of Funkanlagen Leipoldt OHG and may not be copied or circulated without permission
15