1
Download 4 Start up Controller
Transcript
Main Window 2.3.3 Fields Displayed www.pi.ws Header Comments Name Axis designator Stage Stage type Controller Controller or controller network to which the axis is connected Target Current target position |< Move to minimum position < Perform relative step in negative direction Step size Size used for relative steps > Perform relative step in positive direction >| Move to maximum position Position Current position Stop Click to stop axis State State of axis Min. position Minimum position Max. position Maximum position Velocity Velocity to use during moves Max. velocity Limit for velocity Servo Servo state Pos. limit Indicates whether positive limit signal is active Ref. switch Indicates whether current position is above or below reference point Neg. limit Indicates whether negative limit signal is active Find neg. lim. Move in negative direction until negative limit switch trips, then back off limit; can be used to reference an axis PIMikroMove® SM 148E Release 1.0.0 Page 18
