Download Caution! - Moeller

System description SmartWireDarwin
MN05006002Z-EN
PCB for surface mounting enclosure M22-I…
The M22-I… surface mounting enclosures (protection type
IP67) are for the purpose of accommodating up to 6 M22
SWD base function elements. The M22 SWD base function
elements are plugged onto an M22-SWD-I1…6-LP01
printed circuit board, which is inserted into the surface
mounting enclosure. The connection with the SWD network
is created via this printed circuit board.
The standard RMQ Titan surface mounting enclosure
M22-I1…6 in conjunction with standard M22 front
elements are used (a "M22-SWD base fixing", page 64).
Socket/plug switch cabinet bushings
You use switch cabinet bushings with an M18 x 0.75 mm
screw fixing for external connection of the SWD network to
a switch cabinet or enclosure.
You use the switch cabinet bushing, for example, to connect
to a operating panel with M22 SWD… function elements or
to connect to another switch cabinet and in the process to
supply in addition the 24 V DC control voltage for contactors
(a "Connecting a switch cabinet bushing", page 72).
Enclosure bushing socket/plug
Use enclosure bushings with an M20 x 1.5 mm screw fixing
of protection type IP67, for example, in the surface mounting
enclosure or switch cabinet for pluggable connection of the
8-conductor SWD round cable (a "Connecting the enclosure bushing", page 79).
Link for device plug, bottom/front
This link connects an interrupted select cable (SEL cable).
The select cable must be functional for automatic addressing
of the SWD slaves.
SWD accessories
Further accessories such as blade terminals, connectors,
round plugs/round sockets with screw-type locking in
straight or angled finish and pliers for fitting the plug are
available.
18