Download VessRAID - Promise Technology, Inc.

Transcript
Chapter 8: Maintenance
Figure 4. RAID controller cover and attaching screw
Cover
Attaching screw
(one each side)
4.
Remove the four attaching screws. See Figure 5.
5.
Detach the fan’s power connector and lift the old fan out of the controller.
Figure 5. RAID Controller cooling fan
Power
connectors
6.
7.
Attaching
screws (4)
Place a new fan in the controller, attach the power connector, and install the
four attaching screws.
Attach the RAID controller cover and install the two attaching screws.
See Figure 4.
303