Download MODEL PC100 TEMPERATURE CONTROLLER USER MANUAL

SCALE
Function:
Examine present scale for probe
Syntax:
SCALE?
examine probe scale
Description:
The SCALE command allows a remote interface to examine the present scale of units
for the probe. The scale of units for the probe is set in the MENU.
Restrictions:
Remote interface command only
See Also:
MENU
Example:
SCALE?«
DEG C
examine probe scale
controller response, degrees Centigrade
SDEF
Function: Set or examine some of the default parameters.
Syntax:
SDEF = xxxxx
SDEF?
Sets SDEF parameters where x is Y or N.
Examines the SDEF parameters by returning a
5 character string.
where position
1;
2;
3;
4;
5;
Y=RS echo is on
Y=chart temp
Y=DTR-CTS enabled
Y=output PIDs to D/A
Y=buzzer on
Description:
The SDEF allows for setting or examining several of the default settings for the PC100
over the remote bus.
Restrictions:
Remote command only.
PC100 Manual ver 0709
69