Download 1D Mark III

Using a Household Power Outlet
With AC Adapter Kit ACK-E4, you can connect the camera to a
household power outlet and not worry about the battery level.
1
Connect the DC plug.
Connect the DC Coupler’s plug to the
AC adapter’s DC terminal.
the power cord.
2 Connect
Connect the power plug to the power
outlet, then connect the power cord to
the AC adapter.
the DC Coupler.
3 Insert
Insert the coupler firmly all the way,
turn the release handle as shown by
the arrow.
Set the camera’s power switch to
<1>.
The DC Coupler is not water-resistant, so do not get it wet when using it
outdoors.
Do not connect or disconnect the power cord or DC Coupler while the
camera’s power switch is set to <1>.
31