Download DA 6000

OPERATING MANUAL
DA 6000
POSSIBILITIES OF USE
1. AUTOMATIC SYSTEM: GALVANIC CURRENT
1. Make sure that the needle-holder handle is correctly connected (22).
2. Make sure that the pedal is correctly inserted in the connector (14).
The red cable is connected to the indifferent metallic bar (return
electrode) to the red connector in window 4 (18). The client must
maintain this electrode in contact with the skin throughout the whole
treatment. It is advisable that the bar is near the zone to epilate.
3. The appliance is activated through the switch (1).
4. The galvanic current is selected, activating the switch of galvanic
current (2).
Galvanic current
EMA
21