Download CAN-100 - Fujitsu

AN07-00180-3E
(18)
Extension power (5V)
-
Extension 5-V power terminal.
(19)
Extension GND
-
Extension GND terminal.
“Figure 1-2 System connection diagram” shows the connection of the system.
* Prepare the PC by yourself.
AC adapter (accessory)
Use the AC adapter included in the
kit for the connection. (The motor
power is supplied from the AC
adapter.)
Use the USB cable included in the kit for
the connection. (The power is supplied
from the USB bus power.)
BLDC motor (accessory)
Figure 1-2 System connection diagram
Connect the PC with the board by using the USB cable included in the kit.
The power is supplied to the board from the USB bus power.
Directly connect the USB port to that on the PC. Do not make the connection via a USB hub.
- 16 -