Download P2000 Security Management System (SMS) Software User Manual

Transcript
423
Using Switch Controls
The Switch box provides the controls that
allow you to select a Switch and select and use
Tours, Macros, and Switch Auxiliary functions
for the selected Switch if they are available. A
Tour is a programmed set of Camera, Monitor
and Preset selections. Macros are programmed
sets of steps that are to be performed. The program steps can include any function provided
by the associated Switch. Switch Auxiliaries
can be activated using the control buttons in
the Switch box.
Selecting a Tour, Macro or Switch Auxiliary
A Tour, Macro, or Switch Auxiliary is selected
either from the associated drop-down list or by
entering the item number in the respective
field.
Using Tour, Macro or Switch Auxiliary
Controls
The precise functions of the Tour, Macro, and
Switch Auxiliary controls depend on the Protocol for the associated Switch and their application by the CCTV Server system. The controls that may be available are as follows:
Step Backward – The Tour moves back to the
previous Camera, or if the Tour is playing forward, reverses the sequence of operation.
Step Forward – The Tour moves forward to the
next Camera, or if the Tour is playing backward, reverses the sequence of operation.
Selecting a Switch
Only switches that are configured for the
selected CCTV Server are displayed in the
Switch drop-down list. A switch is selected
either from the drop-down list or by entering
the switch number in the Switch field.
If a switch button is red the switch has communication problems. The associated error
message displays below the Camera list box.
This document contains confidential and proprietary information of Johnson Controls, Inc.
© 2014 Johnson Controls, Inc.
Restart – If the function has been stopped, the
restart button starts the selected Tour or Macro
from the beginning.
Pause – This stops the selected Tour or Macro
running but allows you to continue playing
from the point at which the Tour or Macro
stopped.
Play – This activates the selected Tour, Macro,
or Switch Auxiliary.
Stop – This stops the selected Tour, Macro, or
Switch Auxiliary. With some equipment the
stop button may also stop recording a Tour or
Macro.
24-10685-157 Rev. D