Download - ADD-Engineering BV

Clock Line Inversion
The NETmate has the capability to invert the clock signals when required
by the specific type of modem connected to the NETmate. The term
"inverted" means the opposite of the standard clock signal used for
commercial equipment. Clock Line Inversion OFF thus means that the
NETmate is adapted for commercial synchronous equipment.
•
ON
The clock signals (incoming and outgoing, TxC, RxC, ExC) of the
NETmate are inverted.
•
OFF
The clock signals (incoming and outgoing, TxC, RxC, ExC) of the
NETmate are not inverted.
Receiver
Data is clocked in at the inverted or non-inverted clock-signal.
Transmitter
Data is clocked out at the inverted or non-inverted clock-signal.
Forward Data To
The NETmate model NM-9021 can forward data to the asynchronous
channel 2 (Async-Channel-2) or to the network.
• Network
Data received/transmitted on channel-1 is exchanged through the
network
• Async-Channel-2
Data received/transmitted on channel-1 is exchanged through the
asynchronous interface channel-2 (SyncMate emulation).
Receiver
Data is received from the synchronous interface (channel-1) and forwarded
to either the network or the asynchronous interface (channel-2).
Transmitter
•
•
36 ••
•
•
Chapter 4