Download INSTRUCTIONS MANUAL star PROGRAMMER

star Programmer Manual
Examples manual
The parameters defined in a standard installation may be as follows:
Distance from photocell to gun nozzle: 0 mm (in line).
Box length: 255 mm.
Distance between boxes: 80 mm.
Approximate speed of the belt: 100 m/min.
Pattern activation: three (3) applications with three (3) solenoid valves.
Bead delay 1: 100 mm.
Bead length 1: 40 mm.
Bead delay 2 and 3: 50 mm.
Bead length 2 and 3: 15 mm.
1
2
3
A box detection photocell connected to input ‘1’ will be used.
An encoder will be used to control the speed of the box conveyor belt to set the parameters in millimetres.
Three programmer outputs will be used, number ‘1’ for the longitudinal seal bead application (bead 1),
number ‘2’ for the application of the first seal bead of the bottom flap (bead 2) and number ‘3’ for the
second seal bead (bead 3).
The belt speed variation is assumed to be irrelevant, for the purpose of the application thickness, so 010V signal is not used. The activation and deactivation delays compensation function will be used.
Meler Gluing Solutions, S.A.
Vers. 1.11 - 240414
ME-69/106