Download Card ADMIN

Working in the 3G Application Mode
61
USIM Session Management in GemXplorer
In GemXplorer, you can manage USIM sessions via the contextual menu, USIM List
and the Select command dialog boxes.
To manage USIM sessions via the contextual menu:
In the GemXplorer Structure view, right-click the ADF of the UICC application and
select Activation or Termination accordingly.
To manage USIM sessions via the USIM list:
1
In the GemXplorer Structure view, right-click the MF of the UICC application and
then Application List... .
2
To open a USIM session, choose the USIM in the list and click Activation.
3
You can then close the USIM session either explicitly by choosing it in the list and
clicking Termination, or implicitly by selecting another application.
To manage USIM sessions via the Select command
1
In the GemXplorer Structure view, right-click the MF or DF or ADF of the UICC
application and then Select.
2
Select the By Aid option.
3
You can then activate, reset and terminate USIM sessions by:
a) Choosing a Selection Mode. When you choose Only, you can select any USIM
on the UICC. In this case you must enter the USIM’s full AID. When you choose
Last, you select the last USIM selected on the UICC. In this case you need only
enter the first byte(s) of the USIM’s AID.
b) Selecting an Application Mode. Choose Activation to open a USIM session
and Termination to close a USIM session.
Note: The AIDs of the USIM applications installed on the UICC are stored in
the EFDIR file (2F 00h) under the MF.
Default ADF Activation
In the USIM mode, the first ADF found in EFDIR is automatically activated. If you have
more than one ADF in a card, you select an ADF and set it to be automatically
activated, that is, set it as the ‘Default Activated’.
To do this, right-click on your selected ADF and click Activation and Set As Default
Activated... .