Download CFW500 - Programming Manual

Communication
P0021 – Frequency Input Value FI in %
P0022 – Frequency Input Value FI in Hz
Refer to section 12.3 FREQUENCY INPUT on page 12-9.
P0023 – Version of Main Software
P0024 – Version of Secondary Software
P0027 – Plug-in Module Configuration
P0029 – Power Hardware Configuration
Refer to section 6.1 INVERTER DATA on page 6-1.
P0030 – Power Module Temperature
Adjustable
Range:
-20 to 150 ºC
Properties:
ro
Access Groups
via HMI:
READ
Factory
Setting:
Description:
Temperature in ºC measured inside the power module by the internal NTC.
P0037 – Motor Overload Ixt
Refer to section 15.1 MOTOR OVERLOAD PROTECTION (F0072 AND A0046) on page 15-1.
P0040 – PID Process Variable
P0041 – PID Setpoint Value
Refer to section 13.5 PID PARAMETER on page 13-7.
P0047 – CONFIG Status
Adjustable
Range:
0 to 999
Properties:
ro
Access Groups
via HMI:
READ
Factory
Setting:
Description:
This parameter shows the origin situation of CONFIG mode. Refer to section 5.6 SITUATIONS FOR CONFIG
STATUS on page 5-6.
The reading parameters in the range from P0048 to P0075 are detailed in section 15.15 FAULT HISTORY on
page 15-7.
The reading parameters P0295 and P0296 are detailed in the section 6.1 INVERTER DATA on page 6-1.
CFW500 | 16-5
17