Download PTZ Optics 12X

3. Focus Control
5. Presets - Setting and Clearing
AUTO: Change focus mode to AF, which allows the
camera to adjust the focus automatically on the center of
the image.
MANUAL: Change focus mode to MF, which allows the
user to adjust the focus manually (see FOCUS FAR &
FOCUS NEAR).
FOCUS FAR: Press [FOCUS+] button (NOTE: Effective
1. To store a preset position: The user should manually
only in MANUAL focus mode)
setup the shot and then press the [SET PRESET] button
FOCUS NEAR: Press [FOCUS-] button (NOTE:
first and then press the numeric button 0-9. Ten total
Effective only in MANUAL focus mode)
preset positions (0-9) are available from the IR remote
Press and hold the FOCUS FAR or FOCUS NEAR
control (245 available via RS232/RS485/IP Interface).
button, allows for continuous adjustment, stopping as
2. To erase the memory content of a preset position: The
soon as the button is released.
user should press the [CLEAR PRESET] button first and
then press the numeric button 0-9 associated with that
4. Backlight Switch
preset.
Note:
Pressing [*]+[#]+[CLEAR PRESET] in sequence
will erase all presets in the memory.
BLC ON/OFF: Press this button to enable the backlight
compensation. Press it again to disable the backlight
compensation. (Note: Backlight is only effective in full
auto exposure mode)
11
Rev 1.2 7/15