Download to the PDF file.
Transcript
Instruction Manual IM-106-880, Rev 2.0 September 2009 OCX 8800 2. Install and tighten eductor (6) in eductor holder (14). 3. Install and tighten elbow (12) on eductor (6). Male port of elbow must point up and be in line with long axis of eductor. 4. Apply anti-seize compound to the external pipe threads of eductor holder (14). 5. Install and tighten eductor holder (14) in sensor housing (7). Align eductor with matchmarks, as shown in Figure 9-18. Figure 9-18. Eductor Alignment Matchmarks Eductor Flat Straightedge 37390036 Matchmark 9-23