Download Operating Insatructions - RFID Snap-on Module

RFID Snap-on Module
for Mobile Computer MC 959x Series
Operating Instructions (Translation)
Non-explosion-proof
External interfaces
Standard version
Types
G7-A0Z0-0001
G7-A0Z0-0002
G1-A0Z0-7C0001
Approval
Marking
PIN Assignment
1
Ground
2
Reserved
3
5.4 VDC
4
Cradle_Detect
5
Power Gnd
Product marking – Manufacturer’s label
G7-A0Z0-0003
G7-A0Z0-0004
General Data
Physical Features
Dimensions in mm/inches
(length x width x depth)
Weight
User environment
Operating temperature
Storage temperature outside
the hazardous area
Air humidity
Degree of protection
(EN 60529)
80 x 61 x 31 mm /
3.15 x 2.4 x 1.22 inches
approx. 75 g / approx. 0.165 oz
Example:
-20 °C to +50 °C / -4 °F to +122 °F
-40 °C to +70 °C / -40 °F to +158 °F
5 % to 95 % (non-condensing)
IP 54 (snapped on)
4. Radio Frequency Interference Requirements - FCC
Please observe all warning notices with regard to the usage of wireless
devices.
Radio Frequency Interference Requirements - FCC
Note: This equipment has been tested and
found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the
FCC rules. These limits are designed to
provide reasonable protection against
harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Application development
RFID SDK (Software Developer Kit) in Open Source including
demonstration program on the application development
Available for
C#
Download http://www.bartec.de/automation-download/mobile.htm
Supported RFID standards
LF Reader
B7-A2Z0-0020
G7-A0Z0-0001
HF Reader
B7-A2Z0-0021 and G7-A0Z0-0002
UHF EU and US Reader
B7-A2Z0-0022, B7-A2Z0-0023
G7-A0Z0-0003, G7-A0Z0-0004
ATA5567
HITAG 2
EM4xxx (UNIQUE)
HITAG S 2 kb
EM4305
HITAG S256
EM4450/4550
ISO 117845
HDX (Multipage)
ISO 11784/5
HDX-RO
ISO Animal
HITAG 1
Q5
ISO 14443 (e.g. Mifare Ultralight)
ISO 15693
EPC Gen 2
BARTEC GmbH
X
X
X
X
X
X
X
X
X
X
X
X
Max-Eyth-Straße 16
97980 Bad Mergentheim
Germany
X
B7-A2Z0-0023
X
X
B7-A2Z0-0022
X
B7-A2Z0-0021
X
B7-A2Z0-0020
X
G7-A0Z0-0004
G7-A0Z0-0003
EN 60950-1:2006 + A11:2009
+ A1:2010 + A12:2011 + AC2011
EN 301 489-1 V1.9.2: 2011
EN 301 489-3 V1.4.1: 2002
EN 300 220-1 V2.4.1: 2012
EN 300 220-2 V2.4.1: 2012
EN 300 330-1 V1.7.1: 2009
EN 300 330-2 V1.5.1: 2010
EN 50364: 2010
CFR 47 Part 15, Subpart B, Class B
RSS-210 Issue 8
RSS-102 Issue 4
RSS-GEN Issue 3
G7-A0Z0-0002
B1-A2Z0-7D0001 / Revision A / 29 January 2014 - Automation Technology - 359518
Directives/Standards
G7-A0Z0-0001
Radio standard
Types
PIN Assignment
6
USB_DPin
7
USB_D+
8
USB_Vbus
9
Reserved
10
USB_ID
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Tel.: +49 7931 597-0
Fax: +49 7931 597-119
X
X
X
X
X
X
X
X
X
X
[email protected]
www.bartec.de
FCC Note according to 15.21
Any changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate the
equipment.
Radio Transmitters (Part 15)
This device complies with Part 15 of the FCC rules. Operation is subject to
the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including
interference that may cause undesired operation.
Radio Frequency Interference Requirements - Canada
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du
Canada.
Reservation Technical data subject to change without notice. Changes, errors and
misprints may not be used as a basis for any claim for damages.
2/5