Download IPAirEdit user manual 6.10

USER MANUAL IPAirEdit 6.10
Splitting a Marked Segment
The Split operation is used to split an existing marked segment.
You may want to split a Marked segment into several segments to be able to apply
different editing operations to them.
1. Drag the nowline where you want to split the Marked segment.
2. Click the
button in the Editions area.
This works as a Mark IN and Mark OUT operation at once:
Two Marked segments are displayed.
3.10.
Timeline Editing
3.10.1. Purpose
Basic Version of Editing Functions
This section describes the editing operations which can be performed on the incoming
feed to remove A/V material of the incoming feed, insert clips, remove a part of clip,
replace video and/or audio of Marked segments by new clips, or edit video or audio by
effects such as black video, muted audio, video in slow motion, video freezed on a
specific image.
A button and a keyboard shortcut can be used to perform each editing operation. The
ShuttlePRO device and the BEPlay remote device have buttons dedicated to most of
these functions as well.
3. AirEdit Module
81