Download Taximeter

STATISTICAL MEMORY:
READ / PRINT / ERASE
The taximeter has, in its front side, 5 keys (or buttons) called:
OP, K1, K2, K3, K4.
The taximeter has three working modes called:
STOPPED
FOR HIRE
FOR HIRE STOPPED
HIRED N
D
2 0 0 0
K1
K2
K3
HIRED
K4
OP
1 200
TAR. EXTRAS
STATISTICAL MEMORY PRINT-OUT
The taximeter has, inside, 2 blocks of memory called:
BLOCK 1 --- BLOCK 2
Mod.
k= 200 to 100000 i/km
By Digitax S.r.l
62017 Portorecanati
(MC) ITALY
Serial Nr.
960000100
The taximeter's working modes are selectable by pressing the
OP button in the following sequence:
For Hire U OP HiredU OP StoppedU OP
In any of the above taximeter's working mode (FOR HIRE,
HIRED, STOPPED), the other four buttons K1, K2, K3, K4 will
exploit a different function, as below described.
Each one is divided in 45 locations. Each one is enabled to record
and keep the taximeter's activity.
Block 1 is the Partial Block since the activity information
contained in its 45 locations can be read, printed and erased
whenever desired (See specific procedure).
This "Partial Function" is very useful and may be utilized for
working shift data's control and analisys.
Block 2 is the Total or Cumulative Block since the activity
information contained in its 45 locations can only be read and
printed.
STATISTICAL MEMORY READING
1)Select the For Hire mode by pressing OP button;
2)Press K1+K2 buttons at the same time to enter
"Statistical Reading"; (Fig. 4)
3)Press K2 buttons till You reach memory location Nr.5 (memory
locations Nrs. are shown at right side on secondary display) (Fig.
5)
4)When You have reached memory location Nr.5, press K4
button to print out all information contained in memory locations
of both memory blocks. (Fig. 6)
5)Press OP button to go back to For Hire mode and to END
procedure.
36
FOR HIRE STOPPED HIRED Night Day
Fig.4
OP
FARE £
K1
Push these
keys
K2
K3
1
1
k= 200 to 100000 i/km
By Digitax S.r.l
62017 Portorecanati
(MC) ITALY
TAR. EXTRAS £
K4
Mod.
Serial Nr.
960000100
at the same time to Enter
420
FOR HIRE STOPPED HIRED Night Day
A) Taxi in “For Hire”
When the Taxi is parked or it moves without any passenger on
board, the taxi driver selects the For Hire position by OP. The clock
is displayed and the keys will have the following functions:
HOW TO READ THE INFORMATION
CONTAINED IN BLOCK 1 and 2
Fig.5
K1
STATIS
Fig.1
For Hire U K2
UGo back from Chrono to Clock
UShows calendar Day and Month
UShows Year
For Hire U K3
For Hire U K4
Push these
keys
Hired U K2
UInsert Extra Nr 1 (if enabled)
UInsert Extra Nr 2 (if enabled)
Hired U K3
Hired U K4
Reset Extras
C) Taxi in “Stopped”
At the end of the trip, the taxi driver has to select the Stopped
position by OP.
The waiting time counting is thus blocked.
Stopped U OP For HireU OP HiredU OP
Stopped U K1
Stopped U K2
Stopped U K3
Stopped U K4
UInsert Special Extras
UInsert Extra Nr 3 (if enabled)
UInsert Extra Nr 4 (if enabled)
UReset Extras
K4
Serial Nr.
960000100
420
to Stopped
FOR HIRE STOPPED HIRED Night Day
k= 200 to 100000 i/km
By Digitax S.r.l
62017 Portorecanati
(MC) ITALY
TAR. EXTRAS £
Serial Nr.
960000100
Fig.6
OP
1
FARE £
at the same time
K1
K2
K3
5
k= 200 to 100000 i/km
By Digitax S.r.l
62017 Portorecanati
(MC) ITALY
TAR. EXTRAS £
K4
Mod.
Serial Nr.
960000100
36
HOW TO ERASE INFORMATIONS CONTAINED IN
MEMORY LOCATIONS OF BLOCK 1
FOR HIRE STOPPED HIRED Night Day
Fig.2
OP
FARE £
K2
K3
K4
1
Memory
Block
Memory Location Number
Push here to go back
36
Mod.
1
k= 200 to 100000 i/km
By Digitax S.r.l
62017 Portorecanati
(MC) ITALY
TAR. EXTRAS £
- +
Decrease
Increase
B) Taxi in “Hired”
USelects Rate Nr (if enabled)
K3
5
k= 200 to 100000 i/km
By Digitax S.r.l
62017 Portorecanati
(MC) ITALY
TAR. EXTRAS £
K4
Mod.
Push to Print Out
Once the taxi starts the trip, the taxi driver selects the Hired
position by OP. The “Taxi” roof sign will turn off and the taximeter
starts the fare calculation by distance or time.
Hired U K1
K2
K3
Push here to go back
Mod.
Memory Data
K1
Hired U OP StoppedU OP For HireU OP
OP
FARE £
K1
For Hire U K1 Chrono StartU K1 Chrono StopU K1
K2
1
Push to reach loc. 5
FOR HIRE STOPPED HIRED Night Day
For Hire U OP HiredU OP StoppedU OP
OP
FARE £
Serial Nr.
960000100
Memory
Location
Number
to For Hire
FOR HIRE STOPPED HIRED Night Day
Fig.3
FARE £
K1
K2
Changes
K3
K4
OP
2
TAR. EXTRAS £
Mod.
28
k= 200 to 100000 i/km
By Digitax S.r.l
62017 Portorecanati
(MC) ITALY
Serial Nr.
960000100
Memory-Block
1)Select the For Hire mode by pressing OP button;
2)Press K1 + K2 buttons at the same time to enter "Statistical
Reading"; (Fig. 1)
3)The secondary display will now show: (Fig. 2) at its leftside: 1 - indicating the Memory Block Nr. being read pressing K3
button now, to go to Block 2; (Fig. 3) pressing K3 button again, to
go back to Block 1. at its right-side: a number between 1 and
45, indicating the Location Number. (Fig. 2)
4)The main display will now show a Nr. which is the information
contained in the correspondent memory location being read and
now indicated at right-side of secondary display;(please see
locations' list ) (Fig. 2 /3)
5)Press K1 or K2 buttons if You wish to decrease or increase
respectively memory location's Nr. (memory location Nr. is
indicated on right side of secondary display); (Fig. 2)
6)Press OP button to go back to For Hire mode and to END the
Reading Procedure
1)Select the FOR HIRE mode by pressing OP button;
2)Press K1+K2 buttons at the same time to enter "Statistical
Reading";(Fig. 7)
3)Press K2 buttons till You reach memory location Nr.19;
(memory locations Nrs. are shown at right on secondary
display);(Fig. 8)
4)When You have reached memory location Nr.19, press K4
button to erase all information contained in memory locations of
BLOCK 1; (when pressing K4, if the printer is ON all the
information would be printed before being erased);(Fig. 9)
5)Press OP button to go back to FOR HIRE mode and to END
procedure.
36
FOR HIRE STOPPED HIRED Night Day
Fig.7
OP
FARE £
K1
Push these
keys
K2
K3
K4
1
Mod.
1
k= 200 to 100000 i/km
By Digitax S.r.l
62017 Portorecanati
(MC) ITALY
TAR. EXTRAS £
Serial Nr.
960000100
at the same time
2000
FOR HIRE STOPPED HIRED Night Day
Fig.8
OP
FARE £
K1
K2
K3
K4
1
Mod.
19
k= 200 to 100000 i/km
By Digitax S.r.l
62017 Portorecanati
(MC) ITALY
TAR. EXTRAS £
Serial Nr.
960000100
Push to reach loc.19
Push here to go back
2000
to For Hire
FOR HIRE STOPPED HIRED Night Day
Fig.9
FARE £
K1
K2
K3
K4
OP
1
TAR. EXTRAS £
Mod.
19
k= 200 to 100000 i/km
By Digitax S.r.l
62017 Portorecanati
(MC) ITALY
Serial Nr.
960000100
Push to Erase Block 1
Memory Location List
ML
1)
2)
3)
4)
5)
6)
7)
8)
9)
10)
11)
12)
13)
14)
15)
16)
17)
18)
19)
20)
21)
22)
23)
24)
25)
26)
27)
28)
29)
30)
31)
32)
33)
34)
35)
36)
37)
38)
39)
40)
41)
42)
43)
44)
45)
Block 1
Trips total number
Taximeter units total number
Total Kilometers
Total Kilometers in For Hire
Total Kilometers in Hired
Km in for For Hire with passenger on board
Km in Over speed
Collected Total (Fare+Extras+Tax)
Collected by Credit Card Total
Fare Total Amount (excluded Extras+Tax)
Extras Total Amount
Tax Total Amount
Run time in Stopped
Run time in Hired and Stopped
Waiting time in Hired
Meter on total time
Total Tariff 1 collection
Total Tariff 2 collection
Total Tariff 3 collection
Total Tariff 4 collection
Total Tariff 5 collection
Total Tariff 6 collection
Total collections from 7th to 64th
Total tariff 1 units
Total tariff 2 units
Total tariff 3 units
Total tariff 4 units
Total tariff 5 units
Total tariff 6 units
Total units from 7th to 64th tariff
Total Kilometers in tariff 1
Total Kilometers in tariff 2
Total Kilometers in tariff 3
Total Kilometers in tariff 4
Total Kilometers in tariff 5
Total Kilometers in tariff 6
Total Km from 7th to 64th
Not used
Not used
Not used
Not used
Not used
Not used
Not used
Not used
Block 2
idem
idem
idem
idem
idem
idem
idem
idem
idem/100
idem/100
idem/100
idem/100
idem
idem
idem
idem
idem
idem
idem
idem
idem
idem
idem
idem
idem
idem
idem
idem
idem
idem
idem
idem
idem
idem
idem
idem
idem