Download 5-2 Wiring

Preface
Read this manual carefully to ensure correct operation.
This User’s Manual explains the SPB hardware.
In addition to this manual, the following user's manuals, which are related to programming tools, are also available for the
SPB. Please read them as needed.
Title
Type
Manual No.
Contents
Instructions
—
FEH400
Explains the command, etc.
Handy Loader
NW0H-NE
FEH402
Explains the operations, etc of the handy loader.
Personal Computer Loader
NN4NWN-SB
FEH403
Explains the operations, etc of the personal computer.
Internal Hi-speed Counter
—
FEH404
Explains of SPB internal Hi-speed counter.
Communication Adapter
—
FEH405
Explains the communication adapter.
Pulse Output Instructions
and Functional Instructions
—
FEH406
Explains the pulse output instruction and PID.
Analog Unit
NW0A
FEH407
Explains the analog unit
Precautions for using the SPB
• 3 expansion units can be connected to a basic unit only when the version of all basic and expansion units that are
combined is as shown in the table below.
If a unit of old version is mixed in basic or expansion units (including analog units) that are combined, the maximum
number of expansion units that can be connected to a basic unit is 2.
Type
Basic Unit
Expansion Units
Version
NW0P30....-
10.07
NW0P40....-
10.07
NW0P60....-
10.07
NW0E16....-3
10
NW0E16....-0
10
NW0E16X
10
NW0E32....-3
10
Note: Version is indicated on the left side of main unit.
Analog unit can be used only with the following version of basic unit.
Type
Basic Unit
Version
NW0P30....-
10.07
NW0P40....-
10.07
NW0P60....-
10.07
Notes
1. This manual may not be reproduced in whole or part in any form without prior written approval by the manufacturer.
2. The contents of this manual (including specifications) are subject to change without prior notice.
3. If you find any ambiguous or incorrect descriptions in this manual, please write them down (along with the manual
No. shown on the cover) and contact FUJI.