Download LightMoodsTM - AveoEngineering

LightMoods
TM
Single Color Dome LED Neon Ribbon Light
USER MANUAL
DMSC-24V-60
(Green/Blue/Warm White/White/Cool White/Daylight White)
PLEASE READ THESE INSTRUCTIONS CAREFULLY BEFORE INSTALLATION AND LEAVE A COPY FOR THE END
USER/MAINTENANCE ENGINEER FOR FUTURE REFERENCE
FEATURES
IP 65 Accessories Kit
1. Model: DMSC-24V-60
2. Rated input voltage: DC 24V
3. Rated Power:12W/m
4. Dimension: 11.5*29mm
5. LED quantity: 60LEDs/mtr
6. LED Spacing: 16.67mm
7. Min. cutting length: 100mm( 6LEDs)
8. Max. running length: 10mtrs for single end feed；
20mtrs for double ends feed
9. Light color: Single Color
(Green/Blue/Warm White/White/Cool White/Daylight White)
10. Min. bent diameter: 120mm. Do not twist the light.
11. Protection rate: IP68/IP65
12. Protection rate for IP68: Protected against dust and submersion
in water (1meter above).
NOTE: All connector joints must be connected correctly
to achieve IP68 rating
13. Can be cut and extended
14. Long lifetime: 5 years
15.Working ambient temperature: -4°~113°F (-20°~45°C)
16.Operating (bending) ambient temperature: 32°~113°F (0°~45°C)
ACCESSORIES (SOLD SEPARATELY)
Both
Connection
IP
65 Ends
Accessories
KitApplication Accessories Kit
01 Front Connector
02 Front Connector
Cover
Anti-skidding clip
HST
Remark: HST--Heat Shrink Tube
1 pc
1 pc
2 pcs
4 pcs
2 pcs
Both Ends Connection Auxiliary Accessories Kit
Glue
1 pc
Single End Connection Application Accessories Kit
Front Connector Accessories Kit
01 (or 02) Front Connector
Cover
Anti-skidding clip
HST
Remark: HST--Heat Shrink Tube
1 pc
1 pc
2 pcs
1 pc
End Cap Accessories Kit
End Cap
Shading Sheat
HST
1pc
1pc
1pc
Remark: HST--Heat Shrink Tube
Single End Connection Auxiliary Accessories Kit
Glue
1 pc
IP 68 Accessories Kit
Both Ends Connection Application Accessories Kit
01 Front Connector
02 Front Connector
Rubber Gasket
Aluminum Mounting Piece
Anti-skidding clip
Screws
1 pc
1 pc
2 pcs
2 pcs
2 pcs
8 pcs
Single End Connection Application Accessories Kit
Front Connector Accessories Kit
01 (or 02) Front Connector
Rubber Gasket
Aluminum Mounting Piece
Anti-skidding Clip
Screws
1 pc
1 pc
1 pc
1 pc
4 pcs
End Cap Accessories Kit
1pc
1pc
1pc
1pc
4pcs
The Tail Plug
Aluminum Mounting Piece
Anti-skidding Clip
Rubber Gasket
Screws
WARNING AND CAUTION
WARNING
1. Before making any cuts,installation,maintenance or connection, be sure
the mains is disconnected!
2. NOTE: ALL CONNECTOR JOINTS MUST BE CONNECTED CORRECTLY TO
ACHIEVE IP68 RATING.
3. Please operate this flex light according to the instructions, and confirm
the work voltage, it must be matched with product requirements.
4. Please confirm the polarity of connector before insertion front connection cable.
5. Connect and cut this product correctly. Any wrong operation will damage this
product.
6. No pressing on this product during storage, long term pressing may lead to damage.
7. Using qualified DC power supply.
8. Min. bent diameter 120mm, see Fig.1.
9. Do not twist the light as Fig.2 and follow the correct bending direction as Fig.3.
10. Do not hang this light in the air as Fig.4.
11. Cutting at the wrong location will result in a failure of the light! See Fig.5.
DO-160G
tested
Palm Coast, Florida, USA / Los Angeles, California, USA / Pribram, Czech Republic / Birmingham, U.K. / Kuala Lumpur, Malaysia / Mumbai, India
Email: [email protected] / Web: www.aveoengineering.com
LightMoods
Single Color Dome
LED Neon Ribbon Light
TM
USER MANUAL
DMSC-24V-60
(Green/Blue/Warm White/White/Cool White/Daylight White)
Twisting the light is forbidden and observe to correct
bending orientation
CAUTION
Light Surface
Light Surface
Light Surface
×
1. Suitable for mounting on normally flammable surfaces..
2. Use only factory-recommended connectors and accessories.
3. To ensure its long life span, operate the light properly in accordance with the
instructions.
4. Do not operate in more than 113°F (45°C) ambient temperature.
5. Assemble the Connector correctly as in Fig.6.
6. Max. running length depends on the energizing way as Fig.7 shown.
7. Do not operate light when ambient temperature is below 32°F (0°C) thais may injure
the light .
×
×
Light Surface
Light Surface
ASSEMBLY AND INSTALLATION
1. Turn off the electricity before operation.
2. Cut the light at correct location (if need).
3. Assemble the light according to Fig. 8, Fig. 9.
4. Install U channel and light according to Fig. 10.
5. Wire all connectors to the power line and check wiring of the whole circuit.
Cable color coding basics Refer to Fig.11.
FIGURES
Recommened Use
Fig . 2
Fig . 3
√
Fig. 4 Installation of the light hanging suspended in the air as
the picture illustrates is forbidden.
Fig . 1 Minimum bent diameter 120mm
120mm
Light Surface
×
①
DO-160G
tested
√
×
②
2
Palm Coast, Florida, USA / Los Angeles, California, USA / Pribram, Czech Republic / Birmingham, U.K. / Kuala Lumpur, Malaysia / Mumbai, India
Email: [email protected] / Web: www.aveoengineering.com
LightMoods
Single Color Dome
LED Neon Ribbon Light
TM
USER MANUAL
DMSC-24V-60
(Green/Blue/Warm White/White/Cool White/Daylight White)
For 02 Type Front Connector
Fig . 5 Unit cutting guide
Light Surface
Light Surface
PCB
LED
PVC
Cutting line
100mm
01 Front Connector
PCB
02
Pins
Beginning cutting
Wave cutting is incorrect
×
R>90°is incorrect
×
Connector Pins
Connector Pins
√
The correct cutting way,R=90°
×
√
Fig.7 Energizing Method
R<90°is incorrect
×
① Single ends connection for Max. length 10m
Fig.6 Correct insertion of connector pins
For 01 Type Front Connector
② Both ends connection for Max. length 20m
02
Light Surface
01 Front Connector
01 Front Connector
PCB
Pins
02Front Connector
Fig . 8 IP68 Connector Assemble
Rubb
01
Diagram
Connector Pins
Rub
×
DO-160G
tested
Moun
ti n g P
Th
e ta
il p
ber
Gas
ie c e
S c re
sket
w
F ro n
A n ti -s
L ig h t
Connector Pins
√
A
um
lu m in
er Ga
k id d in
t con
n e c to
r
g C li p
ket
lug
A n ti
-s k id
Al um inu m
Sc rew
d in g
C li p
Mo un tin g
Pi ec e
3
Palm Coast, Florida, USA / Los Angeles, California, USA / Pribram, Czech Republic / Birmingham, U.K. / Kuala Lumpur, Malaysia / Mumbai, India
Email: [email protected] / Web: www.aveoengineering.com
LightMoods
Single Color Dome
LED Neon Ribbon Light
TM
USER MANUAL
DMSC-24V-60
(Green/Blue/Warm White/White/Cool White/Daylight White)
Aluminum Mounting Piece
Light
Light
The tail plug
Aluminum Mounting Piece
Screw
Front connector
Screw
Rubber Gasket
Rubber Gasket
Anti-skidding Clip
Step
Step
1.
Anti-skidding Clip
1.
Anti-skidding Clip
Anti-skidding Clip
2.
2.
Aluminum Mounting Piece
Aluminum Mounting Piece
3.
3.
Rubber Gasket
4.
4.
Front connector
Rubber Gasket
5.
5.
6.
Front connector
6.
The tail plug
7.
Screw
7.
8.
Screw
Caution: Right Steps of Screwing:
8.
9.
Caution: Right Steps of Screwing:
9.
DO-160G
tested
4
Palm Coast, Florida, USA / Los Angeles, California, USA / Pribram, Czech Republic / Birmingham, U.K. / Kuala Lumpur, Malaysia / Mumbai, India
Email: [email protected] / Web: www.aveoengineering.com
LightMoods
Single Color Dome
LED Neon Ribbon Light
TM
USER MANUAL
DMSC-24V-60
(Green/Blue/Warm White/White/Cool White/Daylight White)
Fig . 9 IP65 Connector Assemble
Cove
r
A n t i-
s k id
d in g
C li p
L ig h t
Front Connector
Front Connector
Cover
HST
Anti-skidding Clip
S h a d in
Light
g shee
t
Light
End C
HST
ap
End Cap
Step
1.
Step
Pay attention to
wide open side
Shading Sheet
End Cap
1.
G lu
2.
e
2.
3.
G lu e
3.
4.
G lu e
4.
5.
Heat
5.
6.
Heat
7.
6.
8.
DO-160G
tested
5
Palm Coast, Florida, USA / Los Angeles, California, USA / Pribram, Czech Republic / Birmingham, U.K. / Kuala Lumpur, Malaysia / Mumbai, India
Email: [email protected] / Web: www.aveoengineering.com
LightMoods
Single Color Dome
LED Neon Ribbon Light
TM
USER MANUAL
DMSC-24V-60
(Green/Blue/Warm White/White/Cool White/Daylight White)
Fig . 10 Installation Guide
ANSI STANDARD
For Self-lock Aluminum U-channel
Nominal CCT Categories
Aluminum U-channel
Clip
Nominal CCT
Target CCT and tolerance(K)
Target Duv and tolerance
2700K
3000K
3500K
4000K
4500K
5000K
5700K
6500K
2725 ± 145
3045 ± 175
3465 ± 245
3985 ± 275
4503 ± 243
5028 ± 283
5665 ± 355
6530 ± 510
0.000 ± 0.006
0.000 ± 0.006
0.000 ± 0.006
0.001 ± 0.006
0.001 ± 0.006
0.002 ± 0.006
0.002 ± 0.006
0.003 ± 0.006
Flexible CCT
(2700-6500K)
T 2+ ΔT 3
D UVT 2±0.006
Remarks:
1. Six of the nominal CCTs correspond to those in the fluorescent
lamp specification [2]:2700K,3000K(Warm
White),3500K(White),4100K(Cool White),5000K and
6500K(Daylight),respectively.
2. T is chosen to be at 100K steps (2800,2900,…,6400K)，
excluding, hose eight nominal CCTs listed in Table 1.
light
2
3. ΔT is given by ΔT = 0.0000108×T +0.0262×T+8.
4. Duv is given by Duv=57700×(1/T)2-44.6×(1/T)+0.0085
Aluminium U-channel
a
Installation Surface
Screw
b
c
For Common Aluminum U-channel
GUARANTEE
Light Surface
Aluminium U-channel
Installation Surface
Screw
Fig . 11 Cable color coding basics
(+)
(-)
DO-160G
tested
1. We provide lifelong technical assistance with this product:
A 3 year warranty is given from the date of original purchase.
The warranty is for free repair or replacement and covers manufacturing
faults only.
For faults beyond the 3 year warranty we reserve the right to charge for
time and parts.
Current technology will be selected first for repair or replacement.
2. Warranty excludes below:
Any man-made damages caused from improper operation, assembly,
wiring, connection, installation, transport and storage.
Improper input voltage, current, operating and working environment.
The product appears to have excessive physical damage.
Damage due to natural disasters and force majeure.
Product label or data code have been damaged.
3. Repair or replacement as provided under this warranty is the exclusive
remedy to the customer.
We shall not be liable for any incidental or consequential damages for
breach of any stipulation in this warranty.
4. Any amendment or adjustment to this warranty must be approved in
writing by us only.
5. This manual only applies to this model. We reserves the right to modify
the manual and keep the right to make final edition of this manual.
6
Palm Coast, Florida, USA / Los Angeles, California, USA / Pribram, Czech Republic / Birmingham, U.K. / Kuala Lumpur, Malaysia / Mumbai, India
Email: [email protected] / Web: www.aveoengineering.com