Download GART-2000 ® - Reference Manual

Capital 4: Menüsteuerung
143
Figure 4-168: GPS-Constants
There exist the following settings:
4.5.3.2.1
GPS Application
The used differential correction formats can be chosen from a list these two fields. GART2000® CE supports the following differential correction formats for GPS receivers:
Ashtech CPD (RTK)
Ashtech internal corrections for cm-accuracy
Ashtech RTCM (DGPS)
General corrections for m-accuracy
Ashtech RTCM 2.1 (RTK) General corrections for cm-accuracy
Trimble CMR (RTK)
General corrections for Trimble 4000 series
Topcon RTCM (DGPS)
General corrections for m-accuracy
Topcon RTCM 2.1 (RTK)
General corrections for cm-accuracy
Topcon RTCM 2.2 (RTK)
General corrections for cm-accuracy
Topcon RTCM 2.3 (RTK)
General corrections for cm-accuracy
Topcon RTCM 3.0 (RTK)
General corrections for cm-accuracy
Topcon CMR (RTK)
General corrections for cm-accuracy
Topcon CMR+ (RTK)
General corrections for cm-accuracy
Topcon JPS (RTK)
Topcon internal corrections for cm-accuracy
Topcon OmniSTAR
For Topcon-receiver, which accept OmniSTAR correction data;
m-accuracy
Sokkia RTCA
Sokkia internal corrections for cm-accuracy
Sokkia RTCM (DGPS)
General corrections for m-accuracy
Sokkia RTCM 2.2 (VRS)
General corrections for cm-accuracy
Sokkia CMR (RTK)
General corrections for cm-accuracy
Thales RTCM (DGPS)
General corrections for m-accuracy
Thales RTCM 2.2 (RTK)
General corrections for cm-accuracy
Thales LRK (Long
Range) RTK
Thales internal corrections for cm-accuracy
GART-2000® - Benutzerhandbuch