1
Download Speedmachine User Manual
Transcript
Warranty Pass Service plan (continued) parts work hubs check bearing play and brake discs mount pedal check bearing play, check binding mechanism frame check clamping of the front boom clean and conserve check for damage, damage to paintwork quick release check correct closing derailleur check for movement and function clean and lubricate screws and nuts check and tighten mudguards check for damage and correct position valves check for correct position and air tightness stem check clamping check clamping screws cables dismount, lubricate, replace if necessary This service plan is intended to give you a rough overview over the required maintenance and service works. In no case it can replace the detailed instructions in this manual! You can perform service works marked with a “●” when you have the required skills and tools as for example a torque wrench. When you discover any defects while checking your bicycle they have to be repaired immediately. If you are in doubt please consult your local bike shop. 60 HP Velotechnik Works marked with a "▲" should only be carried out by a trained bicycle mechanic. At the annual service the bicycle mechanic has to carry out all works listed as well as all services and maintenance works necessary according to the momentary technical standard and professional knowledge. Please follow at any rate the manuals of the parts manufacturers.
