Download Recording - CNET Content Solutions

Useful Functions
on the remote controller, at the location where
you want to insert the shot mark.
Note
Color Bars/Reference Tone
Shot Marks (UDF, FAT/HD mode)
Shot marks can be recorded at important audio/
video scenes for clips recorded in UDF or FAT/
HD mode. Using shot marks enables the target
scenes to be quickly and easily cued up on the
Shot Mark screen (page 36).
The recorder permits you to record two types of
shot marks: shot mark 1 and shot mark 2.
Shot marks can be inserted as needed during
recording or can be added after recording while
checking the playback pictures on the thumbnail
screen.
The recorder can use shot mark 1 and shot mark 2
as the in-point and out-point, respectively, for inpoint to out-point partial playback (page 29).
Inserting a shot mark during recording
Activate the IR Remote Commander (page 47),
and press the SHOTMARK 1 or SHOTMARK 2
button where you want to insert a shot mark. If the
Shot Mark1 or Shot Mark2 function is assigned to
an assignable button (page 22), you can also use
that button.
Inserting a shot mark during playback
During playback, press the assignable button
assigned with the Shot Mark1 or Shot Mark2
function, or press the SHOTMARK 1 or 2 button
Shot marks can also be added and deleted using
the Shot Mark screen (page 36).
For operation to apply a name to a shot mark, see
“Defining Shot Mark names in Planning Metadata”
on page 25.
OK/NG/KP Flags (for UDF Only)
You can add OK/NG/KP flags to clips recorded
with UDF. By adding flags, you can set the
recorder to display only clips with certain flag
settings on the thumbnail screen (OK/NG/KP/
None-Clip thumbnail screen) (page 28).
Recording
By setting “Color Bars On/Off” (page 42) in the
VIDEO SET menu to “On,” you can output a
color-bar signal in place of the camera picture.
When this item is set to “Off,” the output returns
to the camera picture.
A 1 kHz reference tone is output with the color
bar signal if “1KHz Tone” in “Audio Input” (page
42) in the AUDIO SET menu is set to “On.”
The color-bar signal and reference-tone signal are
also fed out from the SDI OUT, HDMI OUT,
i.LINK, VIDEO OUT (color bars only), and
AUDIO OUT connectors (reference audio signal
only).
You can select the type of color bars with “Color
Bars Type” in the VIDEO SET menu.
Shot marks cannot be recorded onto write-protected SxS
memory cards. Also, shot marks cannot be inserted at the
start or end of a clip.
Note
Use the “Lock Clip” setting (page 32) to protect clips.
Adding a flag
During recording or playback, press the
assignable button to which you assigned the Clip
Flag OK/Clip Flag NG/Clip Flag Keep function.
Deleting a flag
Press the assignable button, twice in succession,
to which you assigned the Clip Flag OK/Clip Flag
NG/Clip Flag Keep function.
OK/NG/KP flags can also be added and deleted from
the thumbnail screen. For details, see “OK/NG/KP
Flag (UDF Only)” (page 34).
OK Mark (for FAT HD Mode Only)
By adding the OK mark to a clip recorded in FAT
HD Mode, you can prevent the clip from being
deleted or divided inadvertently. You can also set
the recorder to display only clips with the OK
mark on the thumbnail screen (OK-Clip
thumbnail screen) (page 28).
Adding the OK mark
When recording of a clip ends, press the
assignable button to which you assigned the OK
Mark function.
While standing by to record, you can also add an
OK mark to the last-recorded clip (“Last Clip”)
on the selected memory card.
Useful Functions
21