Download User manual

SECTION 6 - GENERAL SPECIFICATIONS & OPERATOR MAINTENANCE
EXTENDED DRIVING WITH
HYDRAULIC OIL TANK
TEMPERATURES OF 180° F
(82°C) OR ABOVE.
180° F (82° C)
(HYD. OIL TANK TEMP.)
IF EITHER OR BOTH CONDITIONS
EXIST JLG HIGHLY RECOMMENDS
THE ADDITION OF A HYDRAULIC
OIL COOLER (CONSULT JLG SERVICE
AMBIENT AIR
TEMPERATURE
120° F (49° C)
NO OPERATION ABOVE THIS
AMBIENT TEMPERATURE
110° F (43° C)
100° F (38° C)
PROLONGED OPERATION IN
AMBIENT AIR TEMPERATURES
OF 100° F (38° C) OR ABOVE.
70° F (21° C)
60° F (16° C)
40° F (4° C)
30° F (-1° C)
20° F (-7° C)
MOBIL DTE 13
50° F (10° C)
EXXON UNIVIS HVI 26
80° F (27° C)
MOBIL 424 10W-30
90° F (32° C)
HYDRAULIC
SPECIFICATIONS
10° F (-12° C)
0° F (-18° C)
-10° F (-23° C)
-20° F (-29° C)
-30° F (-34° C)
-40° F (-40° C)
DO NOT START UP HYDRAULIC SYSTEM
WITHOUT HEATING AIDS WITH MOBILE 424
HYDRAULIC OIL BELOW THIS TEMPERATURE
DO NOT START UP HYDRAULIC SYSTEM
WITHOUT HEATING AIDS AND COLD WEATHER
HYDRAULIC OIL BELOW THIS TEMPERATURE
NO OPERATION BELOW THIS
AMBIENT TEMPERATURE
NOTE:
1) RECOMMENDATIONS ARE FOR AMBIENT TEMPERATURES
CONSISTENTLY WITHIN SHOWN LIMITS
2) ALL VALUES ARE ASSUMED TO BE AT SEA LEVEL.
4150548-D
Figure 6-6. Engine Operating Temperature Specifications - Caterpillar - Sheet 2 of 2
3121209
– JLG Lift –
6-17