Download 966R User Manual - Sage Instruments

Transcript
966R Physical Properties
Remote Command Option Enabled
Assigning the 966R IP Address
966R users will need to assign the 966R an IP address and the port identifier. The 966R will accept a static IP
address or a Dynamic Host Configuration Protocol (DHCP) address. Provide the 966R IP Address to all users.
966R Rear Panel Connections
Alarm Relays
For connection to central office alarm systems. There are two alarm relays (A0 and A1). Each relay has a normally
open (NO) and a normally closed (NC) contact. To configure alarms connect a lead to the common (COM) terminal,
and a second lead to the desired (NO or NC) contact terminal.
966R Front Panel
Except for channel activity LEDs the 966R front panel does not have any controls.
Sage Instruments • 966R User Manual •