Download AvanWaves User Guide

Tools Description
Current X-Axis Selector
The Current X-Axis represents the variable and units to be used on the horizontal
axis to display the waveform in the panel. The default X-Axis is the first independent
variable in the Types list. You can modify or change your X-Axis variable as follows:
1. Drag a curve from the Curves section into the Current X-Axis box.
2. Select a curve and click Apply in the Current X-Axis box.
The X-Axis used with this curve is now used as the current X-Axis variable for
the selected curve.
3. Click Default. This resets the value to the default value.
The default value is the first variable that appears in the Types list.
Filter Selector
The Filter is used to select data points based on criteria entered by you for displaying
in the Curves area. You can enter your selection criteria in the Filter field. Regular
UNIX expressions ( *, . ) are accepted. Click Apply to apply your selection as a filter
for the curves. Click Reset to display the default values in the curves area for your
analysis.
The Results Display Window
The Results Display window is the primary application window containing the
menus, options, functions, and tools that you need to perform your simulation
analysis. The Results Display window contains these components:
■
Menu bar
■
Speed bar
■
Panel(s)
■
Wave List
■
Context-sensitive menus
The components of the Results Display window are described in the following
sections.
4-6
1997 Avant! Corporation