Download SIMATIC LOGO! Manual

Applications
Note
LOGO! applications are available to all our customers free
of charge. The examples provided are noncommittal, serve
as general information about the fields of application for
LOGO!, and may be different to user-specific solutions.
The user operates the system at his own responsibility. We
refer to the relevant national standards and system-related
installation regulations.
Although you have four inputs available for logic operations (basic functions, see Chapter 4.2), the following figures will only show a maximum of three inputs for reasons
of clarity. You program this fourth input and assign parameters just like the other three inputs.
Errors can not be ruled out, and the right to make changes
is reserved.
These application and tips for further applications are also
found on the Internet under the URL specified earlier in the
preface.
222
LOGO! Manual
A5E00228550-01