Download standard manual
Transcript
2.0 GENERAL GUIDELINES 2.1 INDICATIONS FOR USE The intended use of this wheelchair is as a manually operated, attendant or user propelled, manual mechanical wheelchair. 2.2 CONTRAINDICATIONS FOR USE A. Information for Health Care Professionals or Assistants æWARNINGæ 1. The Fuze wheelchair must be operated by a health care professional or assistant when in ANY tilt position only when client is unable to propel in a tilted position. 2. To maintain maximum stability, position the rear wheels in the most rearward position in the axle mounting plate. Moving the rear wheels to any of the other mounting positions causes the wheelchair to decrease in stability. 3. If moving the rear wheels to ANY forward position, ensure the wheelchair is stable BEFORE using. 4. ALWAYS ensure stability BEFORE using maximum amount of tilt-inspace or moving the rear wheels forward. TEST wheelchair BEFORE it is occupied by the end user to ensure safety. B. Operating Information æWARNINGæ 1. Unless otherwise noted, all service and adjustments should be performed while the wheelchair is unoccupied. 2. To determine and establish your particular safety limits, practice bending, reaching and transferring activities in the presence of a qualified health care professional BEFORE attempting active use of the wheelchair. 3. ALWAYS wear your SEAT/CHEST POSITIONING STRAP when applicable. Inasmuch as the SEAT/CHEST POSITIONING STRAP is an option on this wheelchair (you may order with or without the Seat /Chest Positioning Strap), PDG strongly recommends ordering the Seat/Chest Positioning Strap as an additional safeguard for the wheelchair user. 4. ALWAYS check foam grips for looseness BEFORE using the wheelchair. If loose, contact a qualified technician for instructions. 5. The necessary back angle MUST be selected BEFORE repositioning the rear wheels forward. Page8 Page Fuze Part # 4532 - Patent Pending May 2007