Download OP Manual

Main Specifications
Supported paper size
letter-size 11”×8.5” (279.4×215.9mm, within ±0.5mm from each side)
legal-size 14”×8.5” (355.6×215.9mm, within ±0.5mm from each side)
Paper thickness
0.13–0.30mm
Paper weight
110–302g/m2
Paper feed tray capacity
50 sheets (for 0.2mm-thick paper)
Finished size
For the dimensions of paper that can be cut into, see pages 14, 15 and 16.
Card receiving capacity
500 sheets for business cards (for 0.2mm-thick paper)
Product receiving capacity
120 sheets for business cards (for 0.2mm-thick paper)
(50–100 sheets for other types of card)
(It varies depending on the dimensions and type of paper to be cut)
Cutting speed
1 min. 18 sec. for 100 business cards (based on 10-up and single cutting)
Dimensions
750mm (W) × 435mm (D) × 290mm (H)
Net weight
24kg
Power requirements
AC120V, 60Hz
Power input
0.7A max.
Accessories
Paper feed tray
After unpacking, make sure that the following accessories are present.
Paper feed tray
fixing thumbscrew
(2 locations)
Machine body
Product receiver
Other accessories
• Power cord
• Operation manual
• Slitter Cartridge v.s. Cut Mode
Trash box
Card receiver
6